ARRI SkyPanel S360-C

These ARRI SkyPanel S360-C LED units have usage hours ranging from about 84-300 hours. They show wear and tear, but are in good working condition.

The ARRI SkyPanel S360-C is an ultra-bright, high-quality LED soft light designed to illuminate large areas with tunable, even output for film, broadcast, and commercial production. With its large aperture and wide 105° beam angle, the S360-C delivers a soft, uniform field that is well-suited for key, fill, overhead ambience, and large diffusion setups where consistent coverage matters.

Bright, Tunable Soft Light for Large Coverage

Engineered from more than a decade of ARRI LED development, SkyPanel combines high output with practical control. The S360-C is described as twice as bright as a 4 kW tungsten soft light or three times as bright as a 12 kW tungsten space light, while still performing smoothly at lower light levels with continuous dimming from 0 to 100%.

Accurate Color, Fast Matching On Set

The S360-C uses an RGBW LED light engine with continuously variable correlated color temperature from 2,800 K to 10,000 K. It supports full plus/minus green adjustment (for matching other fixtures and challenging mixed lighting) and provides vivid color control through hue and saturation. Color rendition is specified at CRI average > 95 and TLCI average > 90, with nominal tolerance of +/- 100 K and +/- 1/8 green-magenta.

Control and Connectivity for Professional Workflows

For integration into studio grids and location rigs, the SkyPanel S360-C offers multiple control options: on-board control, 5-pin DMX in/through, EtherCon LAN network connectivity, USB-A, Art-Net, and LumenRadio CRMX for wireless DMX and RDM. RDM support enables remote setup, access to the hour counter, and standard RDM commands, while Ethernet and USB-A enable fixture status/control and firmware updates.

Build, Mounting, and Power Details

The lamphead features a swappable soft diffusion panel, a carbon fiber yoke with dual high-strength tilt lock, and +/- 90° tilt. It mounts via a 28 mm spigot (Junior pin). Power consumption is up to 1500 W maximum, with 54 V DC lamphead input and a male 4-pin metal locking 30 amp power connection. Rated Protection Class III with IP20, it is intended for controlled environments. Estimated LED lifetime (L70) is 50,000 hours.

• Light aperture: 1280 x 870 mm (50.4 x 34.4 in)
• Measurements (HxWxL): 206 x 240 x 451 mm (8.1 x 9.4 x 17.7 in)
• Weight: 11 kg (24.7 lb)
• Housing color: Blue/Silver