ProLights Eclipse FS RGBL LED Body (Pkg of 2)

This listing is for a Package of (2) ProLights Eclipse FS LED leko bodies only. Lens tubes are NOT included. They have heavy heavy but are in good working condition.

Included in this package are:

• (2) Eclipse FS RGBL LED Body
• Lens tubes are NOT included.
• Power cables and other accessories are not included.

The ProLights Eclipse FS RGBL is a full-color ellipsoidal LED, designed to deliver a full range of pastels, saturates, and whites, both with or without gobos. The Eclipse FS' RGB + Lime LED engine has been specially engineered to provide a full spectrum and full output in the most discerning environments, regardless of which role the EclProfile FS is playing.

Color, White Control, and Gobo Use

Built around a 91x3W RGB + lime LED array, the Eclipse FS RGBL supports smooth RGBL color mixing plus practical white-light control when you need it. Use the dedicated DMX CCT control channel and white presets (2,700K to 10,000K) to match existing fixtures or camera requirements, then return to saturated color and pastel blends without swapping sources. For programming speed, a virtual color wheel with macros is available, along with several pre-built pixel macros with adjustable speed.

For texture and projection, the fixture supports B-size gobos, making it suitable for patterned breakup, logo-style looks, and sharp-edged specials depending on your chosen lens.

Optics and Output (with Optional Lenses)

The Eclipse FS RGBL uses high-quality glass lens optics and accepts optional lens angles of 14°, 19°, 26°, 36°, or 50°. Output is rated at 6,262 lm (26°) in STUDIO mode and 6,524 lm (26°) in HB mode, with illuminance at 3 m listed as 8,090 lx (14°), 7,020 lx (19°), 4,960 lx (26°), 2,610 lx (36°), and 1,190 lx (50°) at full.

Modes for Studio, High Output, and Quiet Operation

Select between HB mode, STUDIO mode, and SILENT mode to balance brightness, color rendering, and acoustic performance for the space. At full output in STUDIO mode, CRI is specified at 82, and at full output in HB mode, CRI is specified at 70.

DMX/RDM Control and Flicker-Free Performance

Control is via DMX512 with RDM for remote monitoring and settings. Multiple DMX channel modes are supported, including 1, 2, 3RGB, 4RGBL, 5RGBL, plus extended options up to 13 channels (including Tungsten, 3,200K, 5,400K, and 6,500K channel modes). Dimming is linear from 0 to 100% with electronic strobe/shutter from 1 to 25 Hz. For video and broadcast environments, the fixture offers flicker-free operation with selectable PWM from 600 to 25,000 Hz.

Power, Rigging, and Connections

The Eclipse FS RGBL runs on 100 to 240V, 50/60Hz with a maximum power consumption of 200W and a power factor greater than 0.95. Power and data pass-through are supported via Neutrik powerCON TRUE1 IN/OUT and Amphenol XLR 5-pin IN/OUT connectors. The IP20-rated, die-cast aluminum body includes a bracket for hanging and positioning, and it is fan-cooled for low-noise operation. Operating temperature is rated from -10° to +45°.

Physical Specifications

• Dimensions (W x H x D): 265 x 259 x 540 mm (10.43 x 10.2 x 21.26 in)
• Weight: 7.3 kg (16.09 lb)
• Body color: black
• LED life expectancy: > 50,000 h

Firmware is upgradeable via USB (UPBOX2 DMX interface not included), and master/slave operation is available for synchronized behavior across multiple fixtures linked in a chain.