Rosco I-Cue Intelligent Mirror

These Rosco I-Cue Intelligent Mirrors show signs of wear, but they have been tested and are in good working condition. A power supply unit (not included) is required to operate.

The Rosco I-Cue Intelligent Mirror is a lightweight, ultra-quiet moving mirror that mounts on an ellipsoidal spotlight, letting you reposition a single beam on cue from your DMX console. It is designed for situations where you need multiple specials from one luminaire, quickly and accurately, night after night, without refocusing the fixture. The stepper motors operate silently, making the I-Cue suitable for television studios, concert halls, and other noise-sensitive environments.

Fixture Compatibility

The Rosco I-Cue will fit virtually any fixture with a 6-1/4in color frame slot such as the ETC Source Four, Selecon Pacific and many others.

Power and Daisy-Chaining

The I-Cue requires a 24v power supply unit (not included) such as the Rosco PSU 50. A 4-pin XLR "scroller" cable is used to connect the PSU to the I-Cue. Multiple units may be "daisy chained" together, limited by cable length guidelines and wattage limitations of the PSU. The I-Cue draws a maximum continuous load of 17 watts. Many of the 24 volt power supply units offered by the major manufacturers of color scrollers will run the Rosco I-Cue. Here is a partial list of the scroller power supply units known to be compatible with the Rosco I-Cue: Wybron - Forerunner; Rainbow - Mini, Maxi and Micro; AC Lighting - Chroma Q and Christie Lites - Color Q.

DMX Control (8-bit or 16-bit)

Operated via a DMX console, the I-Cue can be used in either 8-bit or 16-bit resolution. In 8-Bit mode, the I-Cue uses 2 channels of DMX control, one for pan and one for tilt with 0.9 degrees of pan resolution and 0.225 degrees of tilt resolution. In 16-bit mode, the device requires 4 channels of DMX (pan + fine pan, tilt + fine tilt) and achieves 0.028 degrees of resolution in both pan and tilt for much smoother, more precise positioning.

The LED display allows for easy configuration of operating modes and DMX addressing. See the I-Cue Operation Manual for instructions.

Stand Alone Mode (No DMX Required)

For installations where DMX control is not available, simple repetitive motions can be programmed directly into the I-Cue. See I-Cue Operation Manual for details. In addition, all units come with a pre-programmed "chase sequence" for either self testing the unit without the presence of a DMX signal or for when you want random non-DMX moving light effects(commonly referred to as a "Ballyhoo"). To put the unit into demo mode simply set the DMX address to 600.

Physical Specifications

• Height: 10.25 inches (26.04cm)
• Length: 10.50 inches (26.7cm)
• Width: 9.00 inches (15.88 cm)
• Weight: 3.5 pounds (1.59 kg)