Martin Exterior Wash 110
Description
This Martin Exterior Wash 110 LED par was used for demo purposees and have minor wear. This fixture is in like new condition.
Exterior Wash 110 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. With RGBW premixed LEDs delivering up to 1300 lumens at full white, it provides smooth color mixing and clean white light for architectural accents, facades, and landscape highlights. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures.
Control and Installation
For permanent outdoor installs, the Martin Exterior Wash 110 combines internal power and control with a built-in OLED display for fast setup, addressing, and on-site adjustments. It supports DMX512-A control with RDM (ANSI/ESTA E1.20) for remote device management, and it can also run stand-alone with up to 20 scenes, including global fade and hold times. Firmware updates are supported via serial upload over the DMX link.
Optics and Output
Choose from six different beam angle options to match the throw distance and spread you need, from tight feature lighting to broader wall washes. Intensity is adjustable from 0 to 100% for subtle architectural glow or higher-impact accents.
Outdoor-Rated Housing and Key Specs
Built for exterior environments, the rugged IP66 housing is designed for permanent outdoor use. Control is via DMX or RDM over an RS-485 receiver, with 3 to 5 DMX channels depending on the selected mode.
- Dimensions (L x W x H): 240 mm (9.5 in.) x 198 mm (7.8 in.) x 257 mm (10.2 in.)
- Weight: 5.0 kg (11.1 lbs.)
Additional Details
- Powerful Premixed LEDs
- Up to 1300 lumens at full white (RGBW)
- Six different beam angle options
- Internal power and control (DMX, RDM and OLED display)
- Rugged IP66 housing
- 0–100% intensity control
- Control systems: DMX, RDM
- Stand-alone control: Up to 20 scenes with global fade/hold times
- Setting, addressing, standalone programming: Control panel with OLED display
- DMX channels: 3-5 depending on DMX mode
- Receiver: RS-485
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Serial upload via DMX link
- Length: 240 mm (9.5 in.)
- Width: 198 mm (7.8 in.)
- Height: 257 mm (10.2 in.)
- Weight: 5.0 kg (11.1 lbs.)
- (1) Exterior Wash 110
A member from our team will reach out to the seller to determine the shipping cost and will contact you with the total cost for your approval. Payment will only be authorized, not processed, until the shipping cost is approved by you. Please note that if the item is being shipped to a country that is outside of the "Ships from" country, you will be responsible for any taxes, duties, or fees associated with your purchase.
Ships from: Whittier, CA, USA
