NEW ROBE PATT Driver

Power and Data Box for the PATT 2017, pixelPATT, and onePATT.

Built for PATT Power Distribution and Control

The NEW ROBE PATT Driver combines mains power distribution and fixture data handling in one compact unit, making it easier to deploy compatible PATT fixtures in permanent installs or touring rigs. It supports a wide input range of 100-240V, 50-60Hz with a maximum power consumption of 240W, and is designed for dry, indoor environments (IP20).

Flexible Networking and Protocol Support

For integration with common lighting workflows, the driver supports USITT DMX-512 and RDM, plus Ethernet-based protocols including ArtNet, sACN, gMA I, gMA II, and Kling-Net. Dual RJ45 ports (in/out) allow daisy-chaining, with up to 7 fixtures in an Ethernet IN/Out line.

Onboard Setup and Lighting Tools

Addressing and configuration are handled from the front panel using a two-row LCD display and four control buttons. For programming and playback needs, it includes RGBW/CMY colour mixing, a virtual colour wheel with 66 preset colours, high-resolution electronic dimming, and strobe options including pre-programmed random strobe and pulse effects. Two user programs are available, with up to 50 steps each.

Connections and Electrical Details

• LED port: 1 (locking 4-pin XLR, female)
• DMX IN/OUT: locking 5-pin/3-pin XLR (male/female)
• Power IN: Neutrik powerCON TRUE1 NAC3MPX
• Power OUT: Neutrik powerCON TRUE1 NAC3FPX
• Mains input: 16A max. (CE), 10A max. (cETLus)
• Mains output: 15A max. (CE), 9A max. (cETLus)
• Fuse: T 3.15 A
• Protection factor: IP20 (for dry location only)
• Weight: 3.8 kg