NEW Lightronics AS62DCSL Portable Dimmer

The NEW Lightronics AS62DCSL Portable Dimmer is a compact, clamp-mount dimming system designed for portable rigs, small stages, and temporary installs that need reliable multi-circuit control from a lighting console or standalone chases. It provides 6 circuits rated at 1200 watts per circuit for a total capacity of 7200 watts, with power requirements of 120/240 VAC single phase and 30 amps per leg.

Power, Protection, and Load Handling

The dimming system has 6 circuits with a load capacity of 1200 Watts per circuit. Each circuit is protected by a 10 Amp fast acting circuit breaker. An allowance of 200% overhead capacity is employed in the circuit design. The dimming system has a rise time of not less then 350 microseconds.

Control Options and Setup

A user may program the dimmer attributes of DIM or RELAY, Stand Alone Chaser Mode setup, and unit address via the dipswitch controls. The dimming system shall use the USITT standard DMX-512 protocol or industry standard LMX-128 protocol for direct control of the dimming circuits. With 8 built in chases, the AS62DCSL can run simple looks even without a console, which is useful for work lights, architectural accents, and basic cue sequences.

Connectivity and Mounting

All connections for DMX control are made via 5 pin XLR connectors. Input electrical connections are made through a factory installed four conductor “pigtail,” the user supplies the connector. Output is provided on a 19 Pin LINK Socapex connector for streamlined distribution, and the dimming system is to mounted using standard lighting equipment clamps.