Call Toll Free 1.877.789.8167

NEW Pathway eDIN LED Dimmer/DC Driver, 6 Channel

$595.00

  • WARRANTY: 3 Year Mfr.
  • SOLD BY: NewLighting.com
  • CONDITION: Brand New
Details

Description

Pathway eDIN LED Dimmer modules provide DMX512 control over LED fixtures, with features such as user-definable MIN/MAX output, panic override, 0-10VDC auxiliary inputs and a "DMX present" relay.

Smooth fading, absent from many DMX LED controllers, is assured with an integrated 2,000 step fade processor. Current-sinking control allows each output LED zone to operate at a different voltage.  The DIN form factor makes installation, either in Pathway eDIN enclosures or your own cabinets, fast and easy.

The 1008 eDIN is a dimming interface, independent of the LED fixture and its power supply.  The 1008 will work effectively to dim any constant-current, non-dimming power supply feeding common-anode LEDs. LED fixtures should only be connected to the power supplies recommended by their manufacturers. This can also be used to drive components such as solid state relays and solenoid coils.

NewLighting.com is proud to be an authorized dealer for the top manufacturers of theatrical lighting and event equipment.  We carry factory sealed items that are shipped direct to your doorstep and include all applicable manufacturer warranties.

Features:

  • DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
  • Controls constant voltage LED fixtures rated between 5 to 30 VDC
  • Six PWM outputs, individually fused at 4A
  • 6A-fuse model available for use with 12V LED fixtures
  • Two spare fuses included
  • DMX512-present relay (normally open or normally closed)
  • Contact closure ‘panic’ input drives all outputs to full
  • Auxiliary 0-10V analog inputs HTP-merged with DMX input
  • Indicator LEDs for power, processor, DMX input, active output
  • User-adjustable smoothing algorithm
  • User-adjustable minimum and maximum output levels
  • Multiple loss-of-signal options
  • Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
  • One DMX512-A/RDM data input connection
  • One passive DMX512-A data through connection
  • Data and power easily daisy-chained between modules
  • Termination switch
  • User-initiated diagnostics and test modes
  • 4A at 24VDC per output maximum (96W)
  • 1500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • Input operating voltage: 9-30 VDC
  • 5W power consumption
  • ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
  • ANSI E1.20 RDM(2010) - Remote Device Management
  • CE/FCC
  • RoHS 2002/95/EC
  • Class 2 Low Voltage
  • 0.70 lbs (0.316 kg)
  • 3.6”W x 8.0”L x 1.5”H (91mm x 200mm x 38mm)

Additional Details

Manufacturer: Pathway
Condition: Brand New
Model: 1008
Item #: 7436 (4Wall/UsedLighting.com Owned)
Tags: Pathway, Led dimmer, Dc driver
Specs Includes
  • (1) eDIN LED Dimmer/DC Driver, 6 Channel
  • (1) eDIN 30 Watt, 24VDC Power Supply
Shipping

Shipping on all NEW Items is only $10 per order, no matter how large your order is!

Certified Reviews of NewLighting.com

CERTIFIED REVIEWS

OF NEWLIGHTING.com

See what customers are saying about us.

Home » NewLighting.com » LEDs » LED Dimming » Item #7436